SUPERMICRO X10SDV-12C+-TLN4F Embedded mini-ITX MBD

X10SDV-12C+-TLN4F

• Intel® Xeon® processor D-1567, Single socket FCBGA 1667; 12-Core, 24 Threads, 65W
• System on Chip
• Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets
• 1 PCI-E 3.0 x16, M.2 PCI-E 3.0 x4 (SATA support), M Key 2242/2280
• 2 10GbE and 2 GbE LAN ports
• 6 SATA3 (6Gbps) ports via SoC
• 2 USB 3.0 ports (rear) 4 USB 2.0 ports (via headers)
• 1 SuperDOM, 1 COM, TPM header, GPIO and SMbus headers
• 12V DC Input and ATX Power Source

• Form Factor Mini-ITX
• Dimensions 6.7" x 6.7" (17.02cm x 17.02cm)

• CPU
  • Intel® Xeon® Processor D-1567.
  • Socket FCBGA1667 supported, CPU TDP support 65W
• Cores / Cache 12 cores, 24 threads / 18MB cache

• Memory Capacity
  • Up to 128GB Registered ECC RDIMM, DDR4-2133MHz
  • Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
• Memory Type 2400/2133/1866/1600MHz DDR4 RDIMM and ECC/Non-ECC UDIMM (Operating speed up to 2133MHz)
• DIMM Sizes 4GB, 8GB, 16GB, 32GB
• Memory Voltage 1.2V
• Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)

• Chipset System on Chip
• SATA SoC controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
• IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Network Controllers
  • Dual LAN with Intel® Ethernet Controller I350-AM2
  • Dual LAN with 10Gbase-T
• Graphics Aspeed AST2400 BMC

• SATA 6 SATA3 (6Gbps) port
• LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
• USB
  • 4 USB 2.0 ports (4 headers),
  • 2 USB 3.0 ports (2 rear)
• Video Output 1 VGA port
• Serial Port / Header 1 COM Port (1 header)
• TPM TPM Header

• PCI-E 1 PCI-E 3.0 x16
• M.2
  • M.2 Interface: PCI-E 3.0 x4 and SATA
  • Form Factor: 2242/2280
  • Key: M-Key

• BIOS Type 128Mb SPI Flash with AMI BIOS
• BIOS Features
  • PCI 3.0
  • ACPI 5.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • RTC (Real Time Clock) Wakeup
  • SMBIOS 2.8
  • UEFI 2.4

• Software Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog
• Power Configurations
  • ACPI Power Management
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery

• Voltage +1.8V, +12V, +3.3V, +5V, 1.2V (VDIMM), 4 -fan status, Chassis intrusion header, Monitors for CPU Cores, Supports system management utility, System level control, VBAT
• FAN 4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control
• Temperature Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support
• LED CPU / System Overheat LED, UID/Remote UID
• Other Features 12V DC or ATX Power Source, ACPI power management, Chassis intrusion detection, Chassis intrusion header, M.2 NGFF connector, Node Manager Support, RoHS, UID

• Operating Temperature Range 0°C ~ 60°C (32°F ~ 140°F)
• Non-Operating Temperature Range -40°C - 85°C (-40°F - 185°F)
• Operating Relative Humidity Range 10% ~ 85% (non-condensing)
• Non-Operating Relative Humidity Range 10% ~ 95% (non-condensing)